+353 86 866 2828
  • An empty cart

    You have no item in your shopping cart

BMW F22 2-Series Rear Suspension Kit

BMW F22 2-Series Rear Suspension Kit


WFF22RK. In stock


Revised kinematics, not just dropped knuckle.
If the focus is more towards performance, then the car can act better with lowered ride height, but then the factory designed kinematics wouldn’t work as it supposed to. The kit would give a good kinematics with lowered car – higher roll center, revised camber gain, anti-squat and bumpsteer for maximum grip.
Easy camber adjustment.
As the top links are straight tubular type, then camber can be adjusted simply by changing their length.
Bump steer adjustment.
Possibility to adjust bump steer by changing rod end location in a slot.
Anti-squat adjustment possibility.
Possibility to adjust anti-squat by changing the top forward link height on upright. It can be done in less than 10 minutes at the trackside. Lowering link would increase anti-squat, raising it would decrease anti-squat.
Original wheelspeed sensor (ABS sensor) can be used.
Only takes either M model or 336mm or bigger brake discs.
Smaller brakes will not fit.
Wheel bearing size should be 45x85x41
Kit includes:

Pre-set suspension links.
Uprights with hardware.
Subframe bushings with sperical bearings.

Other components

Hub to hub length (track) is the same as original, as this is defined by halfshaft lengths.
This kit assumes lower (shorter) springs or coilovers to lower the car.
Possibility to use bigger CV joint ø110mm (Driveshaftshop 1200 hp)
Minimum rim size is 17″

Additional information

Car Type


WiseFab Kit

Rear Suspension Kit


There are no reviews yet.

Be the first to review “BMW F22 2-Series Rear Suspension Kit”

Your email address will not be published. Required fields are marked *


Lost your password?